Apache HTTP Server Version 2.2
Apache HTTP Server Version 2.2
The wise man doesn't give the right answers, he poses the right questions.
-- Claude Levi-Strauss
This chapter is a collection of frequently asked questions (FAQ) and
corresponding answers following the popular USENET tradition. Most of these
questions occurred on the Newsgroup comp.infosystems.www.servers.unix or the mod_ssl Support
Mailing List modssl-users@modssl.org. They are collected at this place
to avoid answering the same questions over and over.
Please read this chapter at least once when installing mod_ssl or at least search for your problem here before submitting a problem report to the author.
The mod_ssl v1 package was initially created in April 1998 by Ralf S. Engelschall via porting Ben Laurie's Apache-SSL 1.17 source patches for Apache 1.2.6 to Apache 1.3b6. Because of conflicts with Ben Laurie's development cycle it then was re-assembled from scratch for Apache 1.3.0 by merging the old mod_ssl 1.x with the newer Apache-SSL 1.18. From this point on mod_ssl lived its own life as mod_ssl v2. The first publicly released version was mod_ssl 2.0.0 from August 10th, 1998.
After US export restrictions on cryptographic software were
loosened, mod_ssl became part of the Apache HTTP
Server with the release of Apache httpd 2.
First, let us explain what Wassenaar and its Arrangement on Export Controls for Conventional Arms and Dual-Use Goods and Technologies is: This is a international regime, established in 1995, to control trade in conventional arms and dual-use goods and technology. It replaced the previous CoCom regime. Further details on both the Arrangement and its signatories are available at http://www.wassenaar.org/.
In short, the aim of the Wassenaar Arrangement is to prevent the build up of military capabilities that threaten regional and international security and stability. The Wassenaar Arrangement controls the export of cryptography as a dual-use good, that is, something that has both military and civilian applications. However, the Wassenaar Arrangement also provides an exemption from export controls for mass-market software and free software.
In the current Wassenaar List of Dual Use Goods and Technologies And
Munitions, under GENERAL SOFTWARE NOTE (GSN)
it says
The Lists do not control "software" which is either: 1. [...] 2. "in
the public domain".
And under DEFINITIONS OF TERMS USED IN
THESE LISTS
we find In the public
domain
defined as "technology" or "software" which has been made
available without restrictions upon its further dissemination. Note:
Copyright restrictions do not remove "technology" or "software" from being
"in the public domain".
So, both mod_ssl and OpenSSL are in the public domain
for the purposes
of the Wassenaar Arrangement and its List of Dual Use Goods and
Technologies And Munitions List
, and thus not affected by its provisions.
Errors such as ``mod_ssl: Child could not open
SSLMutex lockfile /opt/apache/logs/ssl_mutex.18332 (System error follows)
[...] System: Permission denied (errno: 13)'' are usually
caused by overly restrictive permissions on the parent directories.
Make sure that all parent directories (here /opt,
/opt/apache and /opt/apache/logs) have the x-bit
set for, at minimum, the UID under which Apache's children are running (see
the User directive).
Cryptographic software needs a source of unpredictable data
to work correctly. Many open source operating systems provide
a "randomness device" that serves this purpose (usually named
/dev/random). On other systems, applications have to
seed the OpenSSL Pseudo Random Number Generator (PRNG) manually with
appropriate data before generating keys or performing public key
encryption. As of version 0.9.5, the OpenSSL functions that need
randomness report an error if the PRNG has not been seeded with
at least 128 bits of randomness.
To prevent this error, mod_ssl has to provide
enough entropy to the PRNG to allow it to work correctly. This can
be done via the SSLRandomSeed
directives.
SSL_XXX variables not
available to my CGI & SSI scripts?Yes. HTTP and HTTPS use different server ports (HTTP binds to port 80, HTTPS to port 443), so there is no direct conflict between them. You can either run two separate server instances bound to these ports, or use Apache's elegant virtual hosting facility to create two virtual servers over one instance of Apache - one responding to requests on port 80 and speaking HTTP and the other responding to requests on port 443 speaking HTTPS.
You can run HTTPS on any port, but the standards specify port 443, which
is where any HTTPS compliant browser will look by default. You can force
your browser to look on a different port by specifying it in the URL like
this (for port 666): https://secure.server.dom:666/
While you usually just use
$ telnet localhost 80
GET / HTTP/1.0
for simple testing of Apache via HTTP, it's not so easy for
HTTPS because of the SSL protocol between TCP and HTTP. With the
help of OpenSSL's s_client command, however, you can
do a similar check for HTTPS:
$ openssl s_client -connect localhost:443 -state -debug
GET / HTTP/1.0
Before the actual HTTP response you will receive detailed information about the SSL handshake. For a more general command line client which directly understands both HTTP and HTTPS, can perform GET and POST operations, can use a proxy, supports byte ranges, etc. you should have a look at the nifty cURL tool. Using this, you can check that Apache is responding correctly on ports 80 and 443 as follows:
$ curl http://localhost/
$ curl https://localhost/
Because you connected with HTTP to the HTTPS port, i.e. you used an URL of
the form ``http://'' instead of ``https://''.
This also happens the other way round when you connect via HTTPS to a HTTP
port, i.e. when you try to use ``https://'' on a server that
doesn't support SSL (on this port). Make sure you are connecting to a
virtual server that supports SSL, which is probably the IP associated with
your hostname, not localhost (127.0.0.1).
This can happen for various reasons. The most common mistakes
include starting Apache with just apachectl start (or
httpd) instead of apachectl startssl (or
httpd -DSSL). Your configuration may also be incorrect.
Please make sure that your Listen directives match your
<VirtualHost>
directives. If all else fails, please start afresh, using the default
configuration provided by mod_ssl.
SSL_XXX variables
not available to my CGI & SSI scripts?Please make sure you have ``SSLOptions +StdEnvVars''
enabled for the context of your CGI/SSI requests.
Usually, to switch between HTTP and HTTPS, you have to use
fully-qualified hyperlinks (because you have to change the URL
scheme). Using mod_rewrite however, you can
manipulate relative hyperlinks, to achieve the same effect.
RewriteEngine on
RewriteRule ^/(.*):SSL$ https://%{SERVER_NAME}/$1 [R,L]
RewriteRule ^/(.*):NOSSL$ http://%{SERVER_NAME}/$1 [R,L]
This rewrite ruleset lets you use hyperlinks of the form
<a href="document.html:SSL">, to switch to HTTPS
in a relative link.
getca or getverisign programs mentioned by
Verisign, for installing my Verisign certificate?An RSA private key file is a digital file that you can use to decrypt messages sent to you. It has a public component which you distribute (via your Certificate file) which allows people to encrypt those messages to you.
A Certificate Signing Request (CSR) is a digital file which contains your public key and your name. You send the CSR to a Certifying Authority (CA), who will convert it into a real Certificate, by signing it.
A Certificate contains your RSA public key, your name, the name of the CA, and is digitally signed by the CA. Browsers that know the CA can verify the signature on that Certificate, thereby obtaining your RSA public key. That enables them to send messages which only you can decrypt.
See the Introduction chapter for a general description of the SSL protocol.
Yes. In general, starting Apache with
mod_ssl built-in is just like starting Apache
without it. However, if you have a passphrase on your SSL private
key file, a startup dialog will pop up which asks you to enter the
pass phrase.
Having to manually enter the passphrase when starting the server can be problematic - for example, when starting the server from the system boot scripts. In this case, you can follow the steps below to remove the passphrase from your private key.
PATH.server.key and
server.crt files:$ openssl req -new -x509 -nodes -out server.crt
-keyout server.keyhttpd.conf
file:
SSLCertificateFile /path/to/this/server.crt
SSLCertificateKeyFile /path/to/this/server.key
server.key does not have any passphrase.
To add a passphrase to the key, you should run the following
command, and enter & verify the passphrase as requested.$ openssl rsa -des3 -in server.key -out
server.key.new
$ mv server.key.new server.key
server.key file, and the passphrase
you entered, in a secure location.
Here is a step-by-step description:
PATH.
$ openssl genrsa -des3 -out server.key 1024server.key file and the
pass-phrase you entered in a secure location.
You can see the details of this RSA private key by using the command:$ openssl rsa -noout -text -in server.key$ openssl rsa -in server.key -out server.key.unsecure$ openssl req -new -key server.key -out server.csrhttps://www.foo.dom/, enter "www.foo.dom" here.
You can see the details of this CSR by using$ openssl req -noout -text -in server.csr$ openssl x509 -noout -text -in server.crtserver.key and
server.crt. These can be used as follows in your
httpd.conf file:
SSLCertificateFile /path/to/this/server.crt
SSLCertificateKeyFile /path/to/this/server.key
The server.csr file is no longer needed.
The short answer is to use the CA.sh or CA.pl
script provided by OpenSSL. Unless you have a good reason not to,
you should use these for preference. If you cannot, you can create a
self-signed Certificate as follows:
$ openssl genrsa -des3 -out server.key 1024host.key file and the
pass-phrase you entered in a secure location.
You can see the details of this RSA private key by using the
command:$ openssl rsa -noout -text -in server.key$ openssl rsa -in server.key -out server.key.unsecure$ openssl req -new -x509 -nodes -sha1 -days 365
-key server.key -out server.crtserver.crt file.$ openssl x509 -noout -text -in server.crtYou simply have to read it with the old pass-phrase and write it again, specifying the new pass-phrase. You can accomplish this with the following commands:
$ openssl rsa -des3 -in server.key -out server.key.new
$ mv server.key.new server.key
The first time you're asked for a PEM pass-phrase, you should enter the old pass-phrase. After that, you'll be asked again to enter a pass-phrase - this time, use the new pass-phrase. If you are asked to verify the pass-phrase, you'll need to enter the new pass-phrase a second time.
The reason this dialog pops up at startup and every re-start is that the RSA private key inside your server.key file is stored in encrypted format for security reasons. The pass-phrase is needed decrypt this file, so it can be read and parsed. Removing the pass-phrase removes a layer of security from your server - proceed with caution!
$ cp server.key server.key.org$ openssl rsa -in server.key.org -out server.key$ chmod 400 server.keyNow server.key contains an unencrypted copy of the key.
If you point your server at this file, it will not prompt you for a
pass-phrase. HOWEVER, if anyone gets this key they will be able to
impersonate you on the net. PLEASE make sure that the permissions on this
file are such that only root or the web server user can read it
(preferably get your web server to start as root but run as another
user, and have the key readable only by root).
As an alternative approach you can use the ``SSLPassPhraseDialog
exec:/path/to/program'' facility. Bear in mind that this is
neither more nor less secure, of course.
A private key contains a series of numbers. Two of these numbers form the "public key", the others are part of the "private key". The "public key" bits are included when you generate a CSR, and subsequently form part of the associated Certificate.
To check that the public key in your Certificate matches the public portion of your private key, you simply need to compare these numbers. To view the Certificate and the key run the commands:
$ openssl x509 -noout -text -in server.crt
$ openssl rsa -noout -text -in server.key
The `modulus' and the `public exponent' portions in the key and the Certificate must match. As the public exponent is usually 65537 and it's difficult to visually check that the long modulus numbers are the same, you can use the following approach:
$ openssl x509 -noout -modulus -in server.crt | openssl md5
$ openssl rsa -noout -modulus -in server.key | openssl md5
This leaves you with two rather shorter numbers to compare. It is, in theory, possible that these numbers may be the same, without the modulus numbers being the same, but the chances of this are overwhelmingly remote.
Should you wish to check to which key or certificate a particular CSR belongs you can perform the same calculation on the CSR as follows:
$ openssl req -noout -modulus -in server.csr | openssl md5
Errors such as OpenSSL: error:14094412: SSL
routines:SSL3_READ_BYTES:sslv3 alert bad certificate in the SSL
logfile, are usually caused a browser which is unable to handle the server
certificate/private-key. For example, Netscape Navigator 3.x is
unable to handle RSA key lengths not equal to 1024 bits.
The private key sizes for SSL must be either 512 or 1024 bits, for compatibility with certain web browsers. A keysize of 1024 bits is recommended because keys larger than 1024 bits are incompatible with some versions of Netscape Navigator and Microsoft Internet Explorer, and with other browsers that use RSA's BSAFE cryptography toolkit.
The CA certificates under the path you configured with
SSLCACertificatePath are found by SSLeay through hash
symlinks. These hash values are generated by the `openssl x509 -noout
-hash' command. However, the algorithm used to calculate the hash for a
certificate changed between SSLeay 0.8 and 0.9. You will need to remove
all old hash symlinks and create new ones after upgrading. Use the
Makefile provided by mod_ssl.
The default certificate format for SSLeay/OpenSSL is PEM, which is simply
Base64 encoded DER, with header and footer lines. For some applications
(e.g. Microsoft Internet Explorer) you need the certificate in plain DER
format. You can convert a PEM file cert.pem into the
corresponding DER file cert.der using the following command:
$ openssl x509 -in cert.pem -out cert.der -outform DER
getca or getverisign programs mentioned by
Verisign, for installing my Verisign certificate?Verisign has never provided specific instructions for Apache+mod_ssl. The instructions provided are for C2Net's Stronghold (a commercial Apache based server with SSL support).
To install your certificate, all you need to do is to save the
certificate to a file, and give the name of that file to the
SSLCertificateFile directive.
You will also need to give it the key file. For more information,
see the SSLCertificateKeyFile
directive.
Yes. mod_ssl has included support for the SGC
facility since version 2.1. No special configuration is required -
just use the Global ID as your server certificate. The
step up of the clients is then automatically handled by
mod_ssl at run-time.
Verisign uses an intermediate CA certificate between the root CA
certificate (which is installed in the browsers) and the server
certificate (which you installed on the server). You should have
received this additional CA certificate from Verisign.
If not, complain to them. Then, configure this certificate with the
SSLCertificateChainFile
directive. This ensures that the intermediate CA certificate is
sent to the browser, filling the gap in the certificate chain.
There can be a number of reasons for this, but the main one
is problems with the SSL session Cache specified by the
SSLSessionCache directive. The DBM session
cache is the most likely source of the problem, so using the SHM session cache (or
no cache at all) may help.
SSL uses strong cryptographic encryption, which necessitates a lot of number crunching. When you request a webpage via HTTPS, everything (even the images) is encrypted before it is transferred. So increased HTTPS traffic leads to load increases.
This is usually caused by a /dev/random device for
SSLRandomSeed which blocks the
read(2) call until enough entropy is available to service the
request. More information is available in the reference
manual for the SSLRandomSeed
directive.
Usually, any SSL ciphers supported by the version of OpenSSL in use,
are also supported by mod_ssl. Which ciphers are
available can depend on the way you built OpenSSL. Typically, at
least the following ciphers are supported:
To determine the actual list of ciphers available, you should run the following:
$ openssl ciphers -v
By default, OpenSSL does not allow ADH ciphers, for security reasons. Please be sure you are aware of the potential side-effects if you choose to enable these ciphers.
In order to use Anonymous Diffie-Hellman (ADH) ciphers, you must
build OpenSSL with ``-DSSL_ALLOW_ADH'', and then add
``ADH'' into your SSLCipherSuite.
Either you have made a mistake with your
SSLCipherSuite
directive (compare it with the pre-configured example in
httpd.conf-dist) or you chose to use DSA/DH
algorithms instead of RSA when you generated your private key
and ignored or overlooked the warnings. If you have chosen
DSA/DH, then your server cannot communicate using RSA-based SSL
ciphers (at least until you configure an additional RSA-based
certificate/key pair). Modern browsers like NS or IE can only
communicate over SSL using RSA ciphers. The result is the
"no shared ciphers" error. To fix this, regenerate your server
certificate/key pair, using the RSA algorithm.
The reason is very technical, and a somewhat "chicken and egg" problem.
The SSL protocol layer stays below the HTTP protocol layer and
encapsulates HTTP. When an SSL connection (HTTPS) is established
Apache/mod_ssl has to negotiate the SSL protocol parameters with the
client. For this, mod_ssl has to consult the configuration of the virtual
server (for instance it has to look for the cipher suite, the server
certificate, etc.). But in order to go to the correct virtual server
Apache has to know the Host HTTP header field. To do this, the
HTTP request header has to be read. This cannot be done before the SSL
handshake is finished, but the information is needed in order to
complete the SSL handshake phase. Bingo!
Name-Based Virtual Hosting is a very popular method of identifying different virtual hosts. It allows you to use the same IP address and the same port number for many different sites. When people move on to SSL, it seems natural to assume that the same method can be used to have lots of different SSL virtual hosts on the same server.
It comes as rather a shock to learn that it is impossible.
The reason is that the SSL protocol is a separate layer which encapsulates the HTTP protocol. So the SSL session is a separate transaction, that takes place before the HTTP session has begun. The server receives an SSL request on IP address X and port Y (usually 443). Since the SSL request does not contain any Host: field, the server has no way to decide which SSL virtual host to use. Usually, it will just use the first one it finds, which matches the port and IP address specified.
You can, of course, use Name-Based Virtual Hosting to identify many non-SSL virtual hosts (all on port 80, for example) and then have a single SSL virtual host (on port 443). But if you do this, you must make sure to put the non-SSL port number on the NameVirtualHost directive, e.g.
NameVirtualHost 192.168.1.1:80
Other workaround solutions include:
Using separate IP addresses for different SSL hosts. Using different port numbers for different SSL hosts.
Although SSL compression negotiation was defined in the specification of SSLv2 and TLS, it took until May 2004 for RFC 3749 to define DEFLATE as a negotiable standard compression method.
OpenSSL 0.9.8 started to support this by default when compiled with the
zlib option. If both the client and the server support compression,
it will be used. However, most clients still try to initially connect with an
SSLv2 Hello. As SSLv2 did not include an array of prefered compression algorithms
in its handshake, compression cannot be negotiated with these clients.
If the client disables support for SSLv2, either an SSLv3 or TLS Hello
may be sent, depending on which SSL library is used, and compression may
be set up. You can verify whether clients make use of SSL compression by
logging the %{SSL_COMPRESS_METHOD}x variable.
No, the username/password is transmitted encrypted. The icon in Netscape browsers is not actually synchronized with the SSL/TLS layer. It only toggles to the locked state when the first part of the actual webpage data is transferred, which may confuse people. The Basic Authentication facility is part of the HTTP layer, which is above the SSL/TLS layer in HTTPS. Before any HTTP data communication takes place in HTTPS, the SSL/TLS layer has already completed its handshake phase, and switched to encrypted communication. So don't be confused by this icon.
The first reason is that the SSL implementation in some MSIE versions has some subtle bugs related to the HTTP keep-alive facility and the SSL close notify alerts on socket connection close. Additionally the interaction between SSL and HTTP/1.1 features are problematic in some MSIE versions. You can work around these problems by forcing Apache not to use HTTP/1.1, keep-alive connections or send the SSL close notify messages to MSIE clients. This can be done by using the following directive in your SSL-aware virtual host section:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
Further, some MSIE versions have problems with particular ciphers.
Unfortunately, it is not possible to implement a MSIE-specific
workaround for this, because the ciphers are needed as early as the
SSL handshake phase. So a MSIE-specific
SetEnvIf won't solve these
problems. Instead, you will have to make more drastic
adjustments to the global parameters. Before you decide to do
this, make sure your clients really have problems. If not, do not
make these changes - they will affect all your clients, MSIE
or otherwise.
The next problem is that 56bit export versions of MSIE 5.x browsers have a broken SSLv3 implementation, which interacts badly with OpenSSL versions greater than 0.9.4. You can accept this and require your clients to upgrade their browsers, you can downgrade to OpenSSL 0.9.4 (not advised), or you can work around this, accepting that your workaround will affect other browsers too:
SSLProtocol all -SSLv3
will completely disables the SSLv3 protocol and allow those browsers to work. A better workaround is to disable only those ciphers which cause trouble.
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
This also allows the broken MSIE versions to work, but only removes the newer 56bit TLS ciphers.
Another problem with MSIE 5.x clients is that they refuse to connect to
URLs of the form https://12.34.56.78/ (where IP-addresses are used
instead of the hostname), if the server is using the Server Gated
Cryptography (SGC) facility. This can only be avoided by using the fully
qualified domain name (FQDN) of the website in hyperlinks instead, because
MSIE 5.x has an error in the way it handles the SGC negotiation.
And finally there are versions of MSIE which seem to require that
an SSL session can be reused (a totally non standard-conforming
behaviour, of course). Connecting with those MSIE versions only work
if a SSL session cache is used. So, as a work-around, make sure you
are using a session cache (see the SSLSessionCache directive).
This usually occurs when you have created a new server certificate for a given domain, but had previously told your browser to always accept the old server certificate. Once you clear the entry for the old certificate from your browser, everything should be fine. Netscape's SSL implementation is correct, so when you encounter I/O errors with Netscape Navigator it is usually caused by the configured certificates.
The following information resources are available. In case of problems you should search here first.
The following lists all support possibilities for mod_ssl, in order of preference. Please go through these possibilities in this order - don't just pick the one you like the look of.
You should always provide at least the following information:
httpd -v. The OpenSSL version can be
determined by running openssl version. Alternatively, if
you have Lynx installed, you can run the command lynx -mime_header
http://localhost/ | grep Server to gather this information in a
single step.
configure command line you used.
In general no, at least not unless you provide more details about the code location where Apache dumped core. What is usually always required in order to help you is a backtrace (see next question). Without this information it is mostly impossible to find the problem and help you in fixing it.
Following are the steps you will need to complete, to get a backtrace:
OPTIM="-g -ggdb3"'' to get this. On
other platforms at least ``OPTIM="-g"'' is needed.
CoreDumpDirectory /tmp'' to
make sure that the core-dump file can be written. This should result
in a /tmp/core or /tmp/httpd.core file. If you
don't get one of these, try running your server under a non-root UID.
Many modern kernels do not allow a process to dump core after it has
done a setuid() (unless it does an exec()) for
security reasons (there can be privileged information left over in
memory). If necessary, you can run /path/to/httpd -X
manually to force Apache to not fork.
gdb /path/to/httpd
/tmp/httpd.core or a similar command. In GDB, all you
have to do then is to enter bt, and voila, you get the
backtrace. For other debuggers consult your local debugger manual.